Blade's production process
:yinglong :2018-07-06 16:08:49
Our Factory is a Professional factory of Different Blades within many years already. Today, we want to introduce the blade production&Blade manufacturing process&turbine blade & wind blade & Razor Blades manufacturing process. In fact, the Blades manufacturing Process is very important for products because it will effect the Quality directly.
what's the blade production Process
Blades Production process flow refers to the production process, the workers use of production tools will be a variety of raw materials, semi-finished products through certain equipment, according to a certain sequence of continuous processing, and ultimately the finished product into the method and process.
Specific description of each process:
Raw Steel Materials in Blade manufacturing process
- Blanking refers to the process of determining the shape, quantity or quality of the material required to make a piece of equipment or product and then removing part of the required material from the entire material.
- Hot forging refers to the metal in the red-hot state, through the hammer or press and other equipment forging the resulting object, in short, is the workpiece burning braised soft, and then use the machine shape into the desired shape. Forging processing can ensure the continuity of the metal fiber organization, so that the forging of the fiber and forgings to maintain the same shape, metal streamline complete, dense tissue, good mechanical properties.
- Annealing refers to the workpiece heated to a certain temperature and at this temperature insulation, and then slowly cooled back to room temperature process.
- Machining is based on the different parts, choose different processing equipment to shape the workpiece.
- Quenching is to heat the workpiece above the critical temperature, heat for a period of time, and then quickly into the quenching agent, so that the temperature suddenly decreased to greater than the critical cooling rate of rapid cooling, and get martensite-based Balance the heat treatment of the organization.
Tempering Skills in the Blade manufacturing process
- Tempering is a method of smelting steel, refers to the workpiece below a critical temperature immersed in a period of time to a certain speed of cooling down, in order to increase the toughness of a material handling.
- Roughing refers to the removal of most of the remainder of the blank, to achieve the basic effect of maintaining the approximate geometry and roughness.
- Quenched and tempered means to the quenching and tempering of the comprehensive heat treatment process, Quenched and tempered can improve the performance of the workpiece.
- Fine grinding is between Rough grinding and polishing two major processes between the important process, the purpose is to ensure that the workpiece before polishing to achieve the required surface accuracy, dimensional accuracy and surface roughness.
- Grinding refers to the use of coating or pressure embedded in the workpiece material, and the workpiece under a certain pressure relative movement, the finishing of the processing surface.
Insepetion Size of Blade manufacturing process
- Inspection refers to the use of tools, instruments or other analytical methods to inspect the finished product to see if it meets the specified technical standards, specifications of the working process.
- Packaging is the last process as the factory, the main process is to product specifications and models for marking, anti-rust oiling and blade protection and classification of packaging.
Above Process not only for Slitter Blades and Log Saw Blade, but also for turbine blade, wind blade and razor blade. We strictly control all Productive Processes to guarantee the High Quality to our customers!
TAG: Blade production process blade manufacturing process
