What size grinding wheel for 3 8 chain
:yinglong :2017-12-09 09:31:07
Ass an manufactory with more over than 40 years experience in producing grinding wheel, we have been cooperating with many companies. And We helped them deal with all kinds of problems about grinding. We offered servers to many industries, Such as Paper, metal, construction and other industries we felt the need to create outstanding sharpening wheels for small end users who require highest quality sharpening tools. After receiving many inquiries for efficient sharpening solution for chain saws we managed to create diamond and CBN wheels to replace those so called "pink" outdated wheels. So, in this article, we will focus on the grinding of chains.
1. The original pink wheel (regular size: 145mm x 22mm x 6.0mm)
2. Different kind abrasive of Grinding Wheel suitable for grinding different workpiece (This is mainly defends on the materials of workpiece). After a lot of experimentation, we found that Diamond and CBN grinding wheels are most suitable for grinding chain saw:
Main advantages of diamond and CBN chain saw sharpening wheels :
*Very long tool life time - will outlast "pink" wheels many many times
*Do not loose the profile, do not change the shape - there is no need to correct wheel with the dresser
*Give superior surface finish - chain saw teeth will be extremely sharp and will stay sharp longer
*Wheel chemical composition is well balanced for wheels to grind without cooling - *you will not burn or temper saw teeth
*There is no dust while grinding - you will not inhale dust to your lungs
*Comes with the cleaning tool - in case wheel gets clogged from a dirty saw
*Diamond and CBN wheels easily replace "pink" wheels - you will not have to rebuild your sharpening machine
*Every wheel comes with reducing spacer to resize bore from 7/8" (22,23mm) to 12mm - in case your grinder has 12mm shaft.
PS: Diameters 5 3/4" (146 mm) , 4" (104 mm) and 8" (203 mm). You should check your grinder which diameter fits your machine. If you need other diameter please inquire and we will offer it for you; Hole diameter is 7/8" (22,23 mm), but every wheel comes with the reducing spacer which reduces bore size to 12 mm. This hole is used on some Stihl or other grinders; For 8" (203 mm) wheels bore diameter is 1" (25,4 mm)
Our wheels can work on many grinders such as:
Oregon, Stihl, Tecomec, Timbertuff, Jolly, Maxx, Franzen, Foley, Northern, Maxx, SIlvey, Franzen and others.
3. Maintenance of the wheel
The wheel does not need to be cleaned in the normal conditions. But if the wheel gets clogged, there is free cleaning tool included with every wheel. To clean the wheel correctly turn on your grinder and let it reach full speed. Then turn it off and while the wheel is rotating, simply touch the cleaning stick to the surface of the diamond or CBN section of the wheel. The cleaning stick will make the wheel spin slower until it stops. You might need to repeat this operation 3-4 times, until you feel that wheel is clean and diamond or CBN grits are open and sharp. We also recommend to flip your wheel after sharpening every 20-30 chains.
The grinding wheel for chainsaw chain we produced have good balance, good sharp and durable. Welcome to enquiry and trail order.
