The following are some factors to consider when selecting the right diamond blade for your application. 

Equipment to be used

The equipment you will be using and its physical condition, will dictate the speeds (RPM’s) and coolants you can use along with your blades. Hence, somewhat limiting your diamond blade selection. Diamond Blades are usually used on the following equipment Precision Diamond Blades are generally used on: 

 

a.) Tile Saw 

b.) Precision Cut off Saw 

c.) Slabbing Saw 

d.) Surface Grinder 

e.) Dicing Saw 

f.) Wafering/Sectioning Saw 

g.) Band Saw 

h.) Gang Saw 

i.) Milling Machine 

j.) Other Equipment

 

Evaluating Diamond Blade Performance

The performance of a diamond blade can be evaluated under various criteria. The importance of any criteria depends on your requirements.

 

Cutting Life - The life of a diamond blade is determined by the number of cuts it can make. It is fairly difficult to estimate the life of diamond cut. Diamond blade life is affected by various factors such as the application, bond type, blade manufacturer, and experience of user in properly using the blade. The following considerations play a major role in diamond blade life:

 

• hardness and abrasiveness of the material being cut 

• speed and power of your equipment 

• amount of pressure used 

• proper use of coolant 

• operator experience 

• overall age and condition of cutting equipment 

• quality, hardness, sharpness, and mesh size of the diamonds 

• hardness of the bond compared to the material being cut 

• experience and technology of manufacturer in keeping diamonds in the bond

 

Finish Quality - The quality of the surface finish is evaluated by the amount of chips generated on the face of the material. A visual check is just about the only way of checking finish quality.

 

Break in time - A diamond blade requires time to break in, to produce relatively chip free performance. The period of time under witch this occurs, separates one diamond blade from another. Frequency of Dressing - The less you have to dress your diamond blade, the better off you will be.

 

 Diamond Blade Bond Types 

Sintered (Metal Bond) Diamond Blades

As a general rule of thumb, Metal Bond (sintered) diamond blades last longer than other diamond cuts available. Life will vary with manufacturer, and factors shown above. With most conventional sintered (metal bonded) diamond blades, you should be able to obtain 450 to 1200 cuts. Metal bonded diamond blades have diamonds sintered and multiple layers of diamonds impregnated inside the metal matrix. They wear evenly, and are known for their consistency. Sintered (metal bonded) diamond blades are the latest technology available in Diamond Blades. And represent the best value and performance per cut.

 

Resin Bond Diamond Blades 

Resin Bond Diamond Blades last less than Sintered (Metal Bond) diamond blades, but more than electroplated (nickel bond) diamond blades. Resin Bond diamond blades are used in applications that require a smooth surface finish and minimum amount of chipping. Made from a tough polymer formed to hold the diamond particles in the bond. A resin bond is really tar in a solid form. A resin bond must remain very fragile in order to expose new diamonds. For this reason, strong and high quality diamonds cannot be used in a resin bond. High quality diamonds are harder than a resin bond matrix, and would soon disintegrate the bond that keeps them in place. The diamonds that are used in a resin bond are poor to medium quality.

 

 Most of them disintegrate or fall out of the bond, before they have a chance of being used. This brings about the need for frequent blade dressing, causing the cut to loose its roundness or form. A more durable bond is sintered (metal bond).

 

HYBRID BOND Diamond Blades 

Between METAL BOND and RESIN BOND. Designed to replace the conventional resin bond diamond blades. You will find all the advantages of cutting speed and fine finish that you have come to expect in a resin bond, and long life, consistency, aggressiveness, durability, and excellent performance on you look for in a metal bond. Hybrid Bond Diamond Blades are used on finish critical applications, that require a minimum amount of chipping and where no further polishing, lapping, or processing of material is planned. Applications include: Glass/Quartz Tubing, Bk7, Fused Silica, Other ultra brittle materials. Advantages include: Less Chipping, Additional Universality in Application - 1 blade will work in both metal bond and resin bond applications, and Greater Consistency in Performance.

 

Electroplated (Nickel Bond) Diamond Blades 

Electroplated Diamond Blades have a high diamond concentration and give a freer, faster cutting action with minimum heat generation. Diamonds stay on the surface of the cut allowing for fast material removal. Electroplated Diamond Blades last less than metal bond, resin bond, hybrid bond blades and are the least expensive diamond blades available. Perfect for smaller jobs and beginning cutting operations. Just about the only type of diamond blade that may be used dry (without coolant) in a few applications, excellent for cutting very abrasive materials.